Thank you so much for getting your surveys filled out so quickly 💖 Just wanted to remind everyone to make any last minute changes that you might want to make to your surveys (ie. updating addresses, adding add-ons, etc.), because the pins are here and I plan to start shipping out rewards this week!
I'm so excited about how they turned out!!
As always please reach out if you have any questions, and thank you again for the support on this project! 🖤 Cam
Thank you so much for your help in bringing this project to life! I'm so excited to get these pins sent out to you all 📬🙈
Now that the campaign is over, the next step is surveys! I will be trying my best to finish those up by the end of the week, so keep an eye out for that. I'd like to have all of the surveys completed by early August, because if everything goes according to plan with my manufacturer, I'm hoping to have the pins in my hand by the middle of August!
I also just placed an order for the stickers, and those should be getting to me at around the same time 🙂↕️
Thank you so much again for your support- I'm already looking forward to my next project ✨
I just finished up the design for the backing cards for these pins, and I'm so excited to show y'all some mockups!
When I design backing cards, I like to do cards specific to pin sets but open enough that I could use them for other pins in a pinch. I've found this is the best way to reduce waste in my packaging 🙂↕️ But this design (front and back) is brand new for these pins!
We hit our funding goal! 🎊 Also a small (but good) change to stretch goals ‼️
Thank you so much everyone for helping bring this project to life!
We hit our first funding goal, which is a huge achievement!!
After doing some reflecting on the stretch goals, my own finances, and what's best for my business, I've decided to go ahead and unlock all of the designs at $500 🙂↕️ I've already approved the samples with my manufacturer and the idea of not getting some of them made feels wrong 😤
What's next?
This is a short crowdfunding period, so there are only 10 days left! I'd love everyone's help in sharing this project with your friends so we can hopefully fund as much as possible. I'm also planning on opening pre-orders on my Etsy shop 🌜
Stationary Update
Truthfully, this has been my smallest crowdfunding project to date. I started off with slightly bigger ambitions for the different types of products I could make for this series, but given the outlook so far I think I need to reign in my expectations just a bit. For that reason, I've decided to no longer release the washi tape and sticker sheet designs, unless we see a pretty big influx of funding. I will still be making the vinyl stickers of all 5 pin designs 🙂↕️
48 hours down 😤 (Plus a little sneak peak at sample pics 🤫)
Hey everyone!
I wanted to reach out and thank you all for your support 💖
We are so close to hitting our first goal- I'd love your help in sharing this project with your friends, family, and whoever else you think might be interested in these little guys 🌝
You can also help keep the momentum going by interacting with community posts 👀 There is even a leader board for community interaction, and I may or may not send the top dog on the leaderboard something special with their rewards 😤
On another note, I've also got some sample pictures of the pins from the factory that I want to share with everyone! Keep in mind, these are unfinished- so they don't have their gold plating, and aren't polished yet. I'm just too excited about them to not share 💫
What's Next? 🪐
Right now I'm in the process of designing backing cards for the pins and finishing up the sticker designs!
Speaking of sticker designs, this is what I was thinking for the Do Not Disturb sticker!
I know its not spot on with the pin design, so I wanted to see what you all think about it 🤨 Make sure you vote on the poll!
Thank you guys again! Keep sharing and engaging to help us hit these goals!!
I just finished up the design for the backing cards for these pins, and I'm so excited to show y'all some mockups!
When I design backing cards, I like to do cards specific to pin sets but open enough that I could use them for other pins in a pinch. I've found this is the best way to reduce waste in my packaging 🙂↕️ But this design (front and back) is brand new for these pins!
Thank you so much for getting your surveys filled out so quickly 💖 Just wanted to remind everyone to make any last minute changes that you might want to make to your surveys (ie. updating addresses, adding add-ons, etc.), because the pins are here and I plan to start shipping out rewards this week!
I'm so excited about how they turned out!!
As always please reach out if you have any questions, and thank you again for the support on this project! 🖤 Cam
Thank you so much for your help in bringing this project to life! I'm so excited to get these pins sent out to you all 📬🙈
Now that the campaign is over, the next step is surveys! I will be trying my best to finish those up by the end of the week, so keep an eye out for that. I'd like to have all of the surveys completed by early August, because if everything goes according to plan with my manufacturer, I'm hoping to have the pins in my hand by the middle of August!
I also just placed an order for the stickers, and those should be getting to me at around the same time 🙂↕️
Thank you so much again for your support- I'm already looking forward to my next project ✨
Thank you so much everyone for helping bring this project to life!
We hit our first funding goal, which is a huge achievement!!
After doing some reflecting on the stretch goals, my own finances, and what's best for my business, I've decided to go ahead and unlock all of the designs at $500 🙂↕️ I've already approved the samples with my manufacturer and the idea of not getting some of them made feels wrong 😤
What's next?
This is a short crowdfunding period, so there are only 10 days left! I'd love everyone's help in sharing this project with your friends so we can hopefully fund as much as possible. I'm also planning on opening pre-orders on my Etsy shop 🌜
Stationary Update
Truthfully, this has been my smallest crowdfunding project to date. I started off with slightly bigger ambitions for the different types of products I could make for this series, but given the outlook so far I think I need to reign in my expectations just a bit. For that reason, I've decided to no longer release the washi tape and sticker sheet designs, unless we see a pretty big influx of funding. I will still be making the vinyl stickers of all 5 pin designs 🙂↕️
I wanted to reach out and thank you all for your support 💖
We are so close to hitting our first goal- I'd love your help in sharing this project with your friends, family, and whoever else you think might be interested in these little guys 🌝
You can also help keep the momentum going by interacting with community posts 👀 There is even a leader board for community interaction, and I may or may not send the top dog on the leaderboard something special with their rewards 😤
On another note, I've also got some sample pictures of the pins from the factory that I want to share with everyone! Keep in mind, these are unfinished- so they don't have their gold plating, and aren't polished yet. I'm just too excited about them to not share 💫
What's Next? 🪐
Right now I'm in the process of designing backing cards for the pins and finishing up the sticker designs!
Speaking of sticker designs, this is what I was thinking for the Do Not Disturb sticker!
I know its not spot on with the pin design, so I wanted to see what you all think about it 🤨 Make sure you vote on the poll!
Thank you guys again! Keep sharing and engaging to help us hit these goals!!
