Community

Our shipping partner, Blue Door, is currently in the process of shipping out hardcover orders. At the moment, they expect to be wrapping up this batch of orders by the end of next week. For those of you receiving hardcovers without slipcases, you should have received tracking information already, and you will see movement as they go out over the next week.

For those of you waiting on orders with slipcovers, the boat bringing them to us is currently in the water. While it is difficult getting updates once the boat has left port, we are currently expecting them to arrive at the port in NY by the end of August. We will be working to get everything to Blue Door as quickly as possible so we can process the remaining orders and get them out to those backers, and we will be posting updates as we get solid information on their arrival to port and to our distribution partner.

We have received two of the Key Issue chrome cover reprints from the printer, and we have been in contact with them daily to get an ETA on the final book. They have experienced a shortage of the cover stock required to print those books, and they are working with the paper mill supplying them to get what they need to complete these books as swiftly as possible.

As more information comes in, we will pass along the information to you. If you are experiencing any issues with your that you received, please reach out to us at [email protected].

We received a new update from the factory today. The Terminator Slipcases have all been checked on quality control and packed with the Terminator Deluxe Hardcover Omnibuses! They're now being compiled by the factory into cases in preparation to send to the freight forwarder and begin their journey to the US. 

The factory expects that they will be able to complete the packaging and prepping by Monday and that the books will be dropped off at the shipping company immediately following.  They have confirmed that as of today we are still looking at an expected US port delivery of 8/30.

The shipper has all of our information for the books to arrive at the port in New York and be shipped via rail to our distributor.  They anticipate one week for receipt, customs clearance, and shipping to occur on the US side. That will mean that we should be able to start shipping the balance of the orders immediately upon receipt at our distribution partner.

We will continue to monitor the status of the shipping and provide additional updates as soon as we get them. Our hope is that by this time next week we are confirming the freight forwarder will have received the shipment and have them beginning the ocean freight process.  

We just received in early samples of the newly created revised Terminator Metal Slipcases. And the good news is that they look fantastic. The revision to the exterior looks great - they are much better protected to withstand wear and tear from display now. Also - the interior felt application is thicker and protects the book finish more than the original did. Both of these improvements should mean that your books are better protected on your bookshelf.

The printer anticipates that the inventory will be fully prepared for shipping within two weeks and the remaining books and slipcases will begin their ocean freight voyage to the US. We will keep you updated on their progress as we get additional information from the factory.

 

We have been working very hard to get the Terminator books shipped out to everyone. But the situation has taken a turn that no one expected and we want to give everyone an update on what is happening with all of the editions.

First - the soft cover trade paperbacks have shipped from our distributor as of this week. Everyone who ordered the soft covers and/or any of the ancillary items should have tracking and be on the lookout for packages coming to you. The email tracking may show up as "Blue Door" in your notices. Just in case you don't recognize the address it is coming from.

The Slipcases are a problem. We got them in and it was noticed immediately that most of them have a substantial factory flaw. The short version is that the way the metal finish was done - it is "wearing out" a spot and leaving a pretty substantial discoloration. 

We could not ship these out the way they are. Fans want these to be perfect and we can't give everyone something we know isn't as good as it should be. So we had to scrap the run and have the factory re-make these. Fortunately they have all the tooling already set so it isn't going to take six months to make them but we did go back and forth to ensure that they were done correctly. It will take about four weeks plus about another six weeks worth of transit time.  That means we are looking at around September 15th.  

We know this news is frustrating. But we could not send out the flawed items to you. It wouldn't be right. 

We are in touch with the factory regularly and will continue to update you as soon as we have more information about the completion of the new run of slipcases. If anyone has questions about your order please email us at [email protected] and we will do our best to answer whatever questions you have.