Project Update: Pre-order store extended!
We have just 11 more to go, so I expect that those surveys will be in in the next week or so.
I have been approving proofs for the enamel pins as they've come in, so production will begin soon, and hopefully that means visual updates for everyone!!
Please feel free to comment or e-mail at [email protected] if you have any questions!
I will be reaching out to backers who ordered custom peekers this week as well to gather info and get you in my work schedule for drawing your sweet little beans :)
Project Update: 14 Surveys Remain!
Project Update: Surveys out - over 50% completed!
I am going to reach out to the manufacturer for a quote, and depending on how that goes, I will remove the quantity requirement for the monster peets in both the pre-order & add-on sections.
Don't be afraid to share the pre-order store with anyone who might be interested, as well! The starry peets are close to being unlocked again as additional add-ons, so the more money is raised, the closer we will be to getting them produced!
Project Update: PLEASE READ!!! ALL surveys going out on MONDAY 5/6!
Please fill these out ASAP - the sooner surveys are filled out, the sooner I can see if monster peets will be unlocked, and more starry peets as well!
Reminder, preorder store is open for anyone interested - items in the preorder store are listed at retail pricing, and are ideal if you were unable to pledge but still want pins!
Pre Order store linked here!!!
Please feel free to leave comments if you have any further comments/concerns/questions! I am doing my best to field issues as they pop up, and appreciate everyone's patience as this is my first set of enamel pins and my first crowdfunding campaign!
A reminder that filling out your survey does NOT charge your card, either!
Thanks again everyone! I'm so excited to see these pins come in - we should be placing the order for manufacturing any day now, which puts us one day closer to PEETS!!!
Project Update: Smoke Test Surveys & Other Notes!
Just a short update to let you know that Smoke Test surveys have been sent out - these surveys are sent to 5% of backers to give me a chance to make any changes or fixes to the surveys before they're sent to all 50+ of you :) If you receive a survey, please fill it out ASAP and if you notice any issues, feel free to reach out to me with any questions or issues.
If you backed within the first 48 hours
If you pledged to 3, 6, or 9 pins
Pre-order store is still open for anyone interested!
If you have any questions, please don't hesitate to reach out through comments here, or support (which forwards e-mail to me if they are unable to help!).
Thank you again for ALL your help bringing this project to life, and I will be sending out another update in the coming week or so!
Project Update: Surveys coming soon!
If you've already corrected your payment, or your payment HAS gone through, don't worry, you have nothing to do except wait for surveys to come out!
Thank you all for your patience - I just felt bad with the radio silence and wanted to give a lil update (as a treat).
REMINDER THAT THE PREORDER STORE IS OPEN: CLICK HERE TO CHECK IT OUT!
Project Update: THANK YOU THANK YOU THANK YOU <3
Some of you have already had your cards charged - this process should continue over the next few days. If your card is declined for any reason, you will receive an e-mail with information & steps to take in order to rectify the situation! (Either re-charging the card, or changing out your payment method).
The system will automatically try to re-charge your card one final time on or around May 2nd and if your card still declines by that point, you unfortunately will NOT be able to get your items. So please be sure any failed charges are fixed by that point!
Pre-Order Store!
CLICK THE LINK HERE TO GET TO THE STORE
I will be sure to send out at least one update about the closing before this happens, but possibly a second as well!
Those who order from the preorder store WILL STILL BE ELLIGABLE FOR FREEBIES! The freebie stickers and pins will be available for purchase, as well, if you'd prefer that!
What happens now?
Surveys are NOT OPTIONAL!
Once your survey is completed, you will be charged for any additional add-on items, I will manually add on your freebies if applicable, and you will be all set until I have received the pins, washi, campaign-exclusive stickers, lanyards, and any other items and am ready to ship them out!
ADDITIONAL REMINDER THAT YOU WILL BE CHARGED SHIPPING SEPARATELY, AFTER YOUR SURVEY IS COMPLETED AND ITEMS ARE READY TO SHIP. I will be sure to send you AT LEAST 2 updates that remind you of this, possibly more as I may include the reminder in every update between now and when shipping begins. Once I am ready to ship items, surveys will be locked and you will no longer be able to make edits. So be sure you add on any items, and answer any relevant questions before this time!
Final notes (for this update, anyway!)
Monster Peets will be available to add to your cart, but will not be charged/fulfilled if we don't hit the number required - across all three designs I will need to see THIRTY of them ordered to be able to afford full production. Even if we don't end up hitting this amount, rest assured that I have already begun plans for a SECOND Peets 'n' Beans campaign, with the rest of mine and Plum's peets as well as monster peets as early stretch goals! This campaign set a fire in me that can only be maintained by MORE PEETS!!!
THANK YOU ALL AGAIN!!
Sorry if you've said this somewhere else, but I couldn't find the answer: for those of us who backed the Full Pin Set, which/how many pins do we get?
Project Update: LESS THAN 24 HOURS REMAIN! NEW add-ons and lots of reminders/updates!!
This washi is now available as an add-on for $6!
We are only $267 away from the final stretch goal - MONSTER PEETS! Because we're so close to the end, these will be available in the add-on section post-campaign IF they are unlocked.
Finally, the WINNING PEET DESIGN (by a pretty wide margin!) is the Neon Splatter Peet!!
This peet is now available as both a pledge tier and an add-on!!
Find Plum's art instagram here for more of her work!!
I wanted to toss in one final reminder about the FREEBIES available!
If you back 3, 6, or 9 peets you get to choose 1 each of these three stickers per number of peets reached! So to get all three, you'll need 9 peets backed!
If you back 5 pins, you get 1 booty pin at random - back 10 you get 2, and back 15 to get all three!
Finally, pin boards are available as an add-on for anyone who would like a matching peet for all their future peet pin needs!!
I also want to sincerely thank EVERYONE for their support on this project. I did not EVER expect this amount of interest and funding on my very first ever enamel pin project, and very first crowdfunding campaign. Y'all have ignited a FIRE in me to continue making more merch and branch out from my crochet roots - I've always loved design, and being able to fulfill this dream has been SO exciting and invigorating for my creative soul.
Reminder, too, that my campaign partner has reached ALL GOALS so has 16 pins available to pledge for as well as several freebie pins for multi-pin backers available - plus if you pledge BOTH CAMPAIGNS you get 2 freebies as well!!
Project Update: Open this update for a fun surprise 👀
The pin board prototype is complete!
Some things to note - the frame will feature a scalloped edge when the real boards are completed. Additionally, there may be changes to the infill pattern used to create the holes in which the pins will seat themselves - I plan to experiment with a few options, but I don't dislike this pattern, so it will remain an option to use!
Additionally, the lines you can see connecting each bean (within the orange peet) will not be present in the final version! This was both mine & my friends' first time attempting a project like this, and so he has made a note to modify how the printer prints the final versions to prevent that from happening.
I want to shout out to Steve for his help on this project - his 3D printing IG is Dragon's Nest 3D Prints and he has been branching out into a lot of exciting projects even if his social media doesn't show it!
Here is a shot of the board without any pins, and it is available as an add-on now for $25. You'll be able to totally customize your paw and beans color in the post campaign survey as well, so rest assured that orange and pink is not the only option!
There will be one final update tomorrow around 10 AM to announce the final peet addition - unless we reach the $2100 and $2500 funding goals, at which point there will be an announcement about the three monster peets and additional washi design.
Thank you all SO MUCH for your help making my VERY FIRST crowdfunding endeavor AND first ever enamel pins such an amazing success!! I can't wait to see all these little peets in person and get going packaging them all up for you to receive!!
Project Update: Mini Update: New Pledge Tiers Added
If you back either of the 6-peet tiers you'll get TWO freebie 3" stickers and ONE freebie pin (pictured below!). The backer's choice tier allows you to choose 6 from ANY available pins (there will be SIXTEEN!!)
If you back the 16-pin tier (with a discount making the pins roughly the same price as the gacha spins!) you not only get 16 peets, you get THREE freebie 3" kitty stickers, and THREE freebie kitty booty pins!
Project Update: VOTE ON YOUR FAVORITE CUSTOM COLLAB PEET!!
I'll have the new options below - the poll will be closing in 48 hours to allow plenty of time for people to choose, and then the winning peet will be available as a pledge, add-on, and post-campaign add-on for those who missed it during the campaign!
CLICK HERE TO VOTE ON YOUR FAVORITE PEET!
This user contributed to this community!
Hey, just wondering if we will be able to add add-ons in the pledge manager after the campaign has concluded? If so will the price be any different?