If you follow a few of my campaigns, you might see a similar update just tweaked a little for each campaign 🙏🏼
I just wanted to give a huge ~*THANK YOU*~ for all of your patience and support! 🙏🏼🖤 I know this update is a little later than I had planned, but I want to be fully transparent and let everyone know what's been going on behind the scenes.
📦 The delay shipping pins:
Shortly after my last update, I was grading and organizing the pins for the final shipping phase. Around this time, my mom had to have emergency heart surgery so I wasn't able to finish grading or ship any of the orders out because I was staying at the hospital a lot. After she recovered and came back home, I had to vend at several conventions & outdoor festivals that kept me on the road for a few weeks (and out of cellphone service at the outdoor shows 😩). I've also been going through some personal life problems during all this, so it's been *A LOT* going on in the background. But I promise I have everything lined up for shipping ASAP!! 🙏🏼
This is basically me trying to do campaign work:
lol
📦 Shipping Update~
Because of the slight delay with getting these shipped out, I went ahead and unlocked the addresses temporarily and locked them again with a 2 day notice for any final edits! This is just incase anyone moved or need to make some changes. You'll get an email soon to confirm those details~
I'm basically at the point of setting up one huge super efficient packing station so I can just knock out shipping all at once! I'm hoping to get the first batch out by next week!! 🙏🏼
This will basically be me here below lol
➡️ If you also ordered something from the Muerte & Magic campaign and combined shipping, those pins are almost done!! If you only combined orders with the insect campaign, you'll be in this first phase of shipping ^_^
✨🖤Thank you so much again for your patience and support 🥺🙏🏼🖤✨
Running several campaigns back-to-back definitely wasn't a part of my original plan. Looking back now, I really underestimated how much all of the campaign work would blend together 😵💫 It's definitely been a learning experience, and one thing I've taken away from this is that I definitely won't be running back-to-back campaigns again.
Moving forward, I want to make sure each project has the time and attention it deserves from start to finish and I'll be making that happen from here on out 🙏🏼 My #1 priority now is getting everyone's orders packaged and shipped out ASAP!! ^_^
Again, I really appreciate everyone's patience through everything 🙏🏼 I'll be posting more updates as I start to ship everything out in batches :) 💌 💌 💌
I’ll be copy + pasting the top part of this update across multiple projects and feature specific campaign news below the top update~ Sorry if you see this pop up more than once if you backed multiple projects 🙏🏼
* * * * * * * * * * * *
📢 Main update across platforms:
Production overview~
🐺 Myths of the Underworld: Over 50% done packing orders, shipping out soon!
🪲 Pinned & Preserved: Final stages of production, should be shipping to me in the next week or two
☠️ Muerte & Magic: In the middle of production
🌿 Rebirth & Ruin: Already submitted art + final counts to start production!
Summary: everything is in either in production already or wrapping up for shipping, all we have to do is wait for everything to arrive now!! 💌🎉
My collab partner Allison and I placed both of our orders together, so it’s a fairly large order that is taking a bit of time to complete. Rest assured, everything has been coming together in the background ^_^
* * * * * * * * * * * *
📣 Myths of the Underworld additional update:
Sorry for the slight delay getting these pins out! Grading the pins took wayyy longer than I thought it would! It took me roughly about a month just to go through every single pin to make sure there were no errored pins being packaged up. It also took me a while to add all the pins to their own individual backing cards, add the chains by hand to all the Cerberus + Fenrir pins, and wrap each pin up in tissue paper.
I'd say I'm roughly halfway done packing orders up, so I'm doing this as fast as I can outside my regular day job. I'll send another update when I'm 100% done packing orders and ready to buy the shipping labels 💌
Last year I signed up to participate in the Bag Baazar ita bag event this month, and it is launching next Tuesday, May 12th @3pm EST! You may have already seen these gaming ita bags in previous campaign add-on shops, if you want one this is your last chance to reserve a gaming ita bag!!
If you want to support the campaign and grab some pins you may have missed from my collection, you can earn the (2) Surfing Turtle pin variants below! 🌊🐢
📣 Early Bird pin (regular variant) + Group Collab pin (shiny variant):
* * * * * * * * * * * *
📣 All returning backers will also get a matching sticker~
Quick update here~ The pins finally arrived and I’ve started going through everything to start the pin grading process 🖤
🔐 Locking Addresses:
If you haven't seen the email, I've already locked down shipping addresses! If you need to make any changes to your address, in your survey, click 'Need help?' on the top right corner, and then select 'Contact Us' from the left sidebar to contact the Backerkit team for assistance on changing that 😊
For those that are combining orders with the Pinned & Preserved campaign, I'll be confirming your address again once the other pins arrive~ So no worries if things might change later, I'll hang onto your order until the other pins come in 💕
🔗 Deluxe Chained Pins:
The Cerberus and Fenrir designs will take a little extra time to grade since I’ll also be adding the chains on each pin myself before they’re packaged up.
Before chains are added~
Black Fenrir
Cerberus
White Fenrir
After chains are added~
After playing around with many chain possibilities, I've landed on this layout as the final look 🖤
📝 Grading Process + Timeline:
This part takes a bit of time because I inspect every single pin by hand to make sure there's no errors or accidental B-grades going out. After inspection/grading is finished, I put each pin on its own backing card and wrap it up in tissue paper. Then I start packaging all the orders according to their packing list and everything gets double-checked before being sealed up.
➡️ This entire process should take me a few weeks, but you should start seeing shipping emails slowly trickle out as I work through each order ^_^ Just keep an eye out for your inboxes with a tracking number~
Thank you all so much for your patience while waiting for these to arrive! These pins turned out incredible to look at in person and I can't wait to get them shipped out to their forever homes!! 😻🏠💖
I wanted to share a long overdue update on Pin Quest: Myths of the Underworld. I’m really sorry this campaign has been quiet for a bit, there's been a lot happening in the background and I want to be transparent about the delay if you haven't followed my other campaigns.
Long story short: the delay came from running 3 campaigns (Pin Quest, Pinned & Preserved, and Pintober) back-to-back with very little downtime in between campaigns. On top of overlapping campaigns, I was also dealing with several unexpected family emergencies that made it difficult for me to keep everything moving on the original timeline I had planned out.
🙏🏼 The long version for the delay (if you didn't see updates from the other campaigns)
➡️ Back to back campaigns: While running Pin Quest, an artist that was part of the upcoming League of Science pin event asked me to join and asked if I could do more insect pins like in my Rebirth & Ruin campaign. I happily agreed, but I didn't fully anticipate how tight the schedule would be in between setting up & running multiple back-to-back campaigns, cleaning up lineart, and preparing artwork for the next event. I originally planned to have more time between Pin Quest and Pintober to clean up/vectorize the artwork, but with the added insect pin campaign I had to put a pause on cleaning up the Pin Quest designs in order to run the events on time.
➡️ Family emergencies: During the middle of running Pinned & Preserved after Pin Quest, my mom was hospitalized due to a severe spider bite infection that required multiple surgeries to clear out of her system. Thankfully she made a full recovery 🥹🙏🏼 Shortly after this, there was a cancer scare that required more testing back at the hospital, but thankfully that all came back negative. After this happened, my closest grandma passed away which was a very difficult loss to deal with on top of everything.
Once things settled down, I jumped immediately back into my work cleaning up the Pin Quest lineart for my manufacturer. Balancing campaign work in between these 2 family emergencies caused some delays getting production started, and I ended up a little overwhelmed and slower to check in than I meant to be. For that I sincerely apologize 🙏🏼 I just want to be transparent about everything and I want to thank you all so much for your incredible patience during this time. It really does mean a lot right now (I also hope you all are taking care of yourselves too, I know life can be rough to everyone sometimes 💖)
🙌🏼 The great news is that pin production is finally finished after their super busy holiday season, and the pins will ship out to me soon! 💖
📸 Take a look at the pins! They look amazing! 😻✨
Jörmungandr- Chibi Snake/Japan
Underworld Skull Key- gold/white
Jörmungandr- green
Jörmungandr- rainbow metal
Underworld Skull Key- red/black
Jörmungandr- rainbow metal in the sun ☀️
Hydra- rainbow metal
Hydra- rainbow metal in the sun ☀️
Hydra- rainbow metal
Baphomet black rainbow 🌈🖤✨ (before epoxy)
Cerberus before chains are added
Baphomet white rainbow 🌈🤍✨
Black Fenrir before chains are added
Gray Fenrir before screenprinting and before chains are added
White Fenrir before chains are added
➡️ Once the pins arrive, I’ll be grading everything ASAP so I can ship out pins to their new homes~ Shipping will probably start at the end of this month/beginning of next month so keep an eye out for your tracking number email ^_^
And one last announcement:
💀 Coming Soon: Rebirth & Ruin II: Consumed 🌿
🚀 Pintopia 2026 launches in one week on Jan 22nd @ 1pm EST~!
Rebirth & Ruin II: Consumed is a part 2 series from last year's Pintopia! This campaign continues to celebrate the dark beauty of decay, consumption, and renewal in nature 🖤🌿🥀
📣 Sign up for notifications on the teaser page link here below so you don’t miss out on these new pins ^_^
Thank you for filling out your surveys so quickly!! 🙏🏼 If you haven't filled out your survey yet, please do so as soon as you can~ If you lost your survey,you can recover it here.
➡️ If you didn't see the last email, orders will be locking automatically soon so I can get the final counts over to my manufacturer! Since the last update, they have been working on rendering the art to create the pin molds while they wait for my final pin counts to start mass-production. That also means I’ll be charging cards this weekend to pay for all the extra pins that were added during the survey period.
If you need me to hold off charging your card for any reason, just leave me a comment here on this update and I’ll make sure to make a note to wait.
👉🏼 As a side note, everyone seemed to love the new chibi Jörmungandr red chrome pin featuring Japan/Asia! I'm so happy this pin had some love 🐍❤️
Thank you so much again for your support for Myths of the Underworld during Pin Quest!🙏🏼 I’m so excited to see what these pins will finally look like, I'll be back with another update as soon as I get some news! 🖤✨
