No. You can choose physical pledges and we’ll print the bases for you. However, if you want to 3D print them yourself we recommend the Elegoo Saturn 4 Ultra (https://geni.us/elegoosaturn) for a resin printer, and the Bambu Labs P1S (https://www.miniwargaming.com/p1s) for an FDM printer.

Resin will always be a better quality, but most of these bases will print just fine using an FDM printer, especially if you decrease the layer height from 0.2mm to 0.08mm. We've also found that using a 0.2mm nozzle instead of the standard 0.4mm nozzle can make a big difference in quality for printing bases.

No, for FDM printing. And yes, for resin printing. Thankfully whatever slicer you use will be easily able to support these bases. Just remember to angle them around 60 degrees to make them print better with resin printers (keep them flat for FDM printing).

Every theme includes round, oval, and square bases.

Each theme includes a full range of common base sizes used in tabletop games.

Files will be delivered about 2 weeks after the campaign ends through MyMiniFactory, after you complete your survey.

We’ll begin production after the campaign and ship orders as they are completed. Our goal is to have everything shipped by August 2026.

BackerKit Crowdfunding is an all-or-nothing collaborative funding platform. Creators share their project ideas and set a funding goal with a deadline. Backers pledge money to help make the project possible.

If the project meets its goal by the deadline, pledges are charged and the creator moves forward. If it doesn’t, no one is charged.

Pledging in crowdfunding is a commitment to support the creation of a new product or project. Unlike a traditional purchase, you're not buying an item that already exists. Instead, your contribution helps bring a creative idea to life, and in return, you typically receive rewards (such as the product itself) as a thank you for your early support.

1. Select a pledge level with the reward(s) you would like to receive
2. Select any add-ons
3. Confirm your pledge!

• You are charged only if the campaign meets its funding goal.
• Charges happen when the campaign ends, not when you pledge.

After the campaign ends, you'll receive a survey to pay for any applicable shipping fees, calculated based on your shipping address.

Pay Over Time allows you to split your pledge into multiple payments over a set period. Your card will be charged according to the payment schedule (four monthly payments). Only available for projects that enable this feature. Learn More »

Only the project creator and the BackerKit Support Team can see your pledge and contact information. Other backers and the public cannot see your individual pledge amount or personal details.

You can change or adjust your pledge level and add-ons before the campaign ends. After the project concludes, cancellations or changes are at the creator's discretion and may depend on what stage the project is in.

Overtime Mode extends your campaign past its original end time to give backers a final chance to make their pledge. It will add an additional 10 minutes past the end time as long as pledges keep coming in. The campaign will end when there is a 10-minute period without any new pledges.

For specific questions about your pledge or the project, you can view the Project FAQ below, search for your answer within the project, or send a message to the BackerKit Support Team or to the project creator.