I have placed and paid for the enamel pin order. This is the big one that will take the longest in production!
I have worked with this manufacturer before, and after placing the order and approving the designs from their team, it usually takes about a month before I start hearing back with some pictures of the pins. So hold tight!
I will be locking orders down on Tuesday, September 1st. You have until then to change around any pins in your order!
Next up I will be making the print order and talking with my sticker manufacturer. Both of these orders will take 2-3 weeks to get to me once I finalize payment, so I should get pictures of them very soon!
80% of Surveys Completed, in talks with manufacturers
Thank you so much to the 80% of you that have completed your survey! You've given me enough information to send to my manufacturers and begin the ordering phase.
I haven't locked surveys for anyone yet, so there is still time to edit any choices!
I will be back once I've finalized the pin order and it officially goes into production!
A few of you guys should be getting your surveys today! If you are one of the folks chosen and happen to spot an error please let me know in the comments of this update!
There are about 30 backers that had payments that failed, so double check that yours went through!
For Pre-Launch Followers: I was actually able to add the option to pick your sticker design. I wasn't sure if I would be able to offer it when I created the bonus for the campaign. So you will be able to chose your sticker! I have added a 'Surprise Me' option if you still wanted a mystery sticker instead!
For USA backers: I was able to estimate shipping for each state, so for those of you on the east side of the country, your shipping is a little less than what I said it would be!
I will send out the rest of the surveys in the next day or so!
Thank you so much for all 410!!! (wow!) backers! You guys are the best. Thank you so much for supporting my first campaign! I am still at a loss of words to express my gratitude! Let me line up what's next on the agenda:
SURVEY CREATION will be underway for the next few days. I've done a bit of work before the campaign ended but now that is has I can finalize it and start sending out smoke tests (sending to a few to iron out the kinks before sending to everyone). This gives you guys a bit of time to finalize failed payments (it has happened to me before as a backer!) and think about your choices for designs!
Once I put out all surveys, and about 80% of you guys get your choices in, I can send the orders off to my manufacturers! That will be the longest wait of the process (1-2 months), but hopefully will be able to share product photos with you all as I receive them!
I will let you guys know when I start sending out the surveys!
Thanks so much for supporting this campaign, Jessica / Nifty
With only a handful of days left I come to you with all 25 sticker designs finalized!
All stickers are 3 inches on the longest side, and finished with a matte vinyl covering. They are waterproof and very sturdy!
I have gotten sample of 4 designs already which I wanted to share with you, the colors turned out so lovely! You will be able to pick from any of the designs during the survey a couple days after the campaign ends.
Hello! Here to answer a few questions that have been asked in the past week, and to inform all backers on what will be included FOR FREE on all pledges.
First up, I wanted to update you all on the status of the previously cross-collab exclusive pins: 1" Mini Squirrel & Leaf and the 1" Mini Dove & Ivy. I'm making both pin designs FREE for ALL BACKERS and will be included in every pledge level, along with the 1" Mini Jay, Holly & Lion.
This means ALL PLEDGES will include:
THREE 1" Mini Enamel Pins
ONE Sticker Sheet
All mini pin designs will be available to add-on to existing pledges, should you want duplicates of any design.
========
Secondly, I've added a new pledge level!
NEW PLEDGE LEVEL: 2 Mini-Enamel Pins
Along with the FREE Mini-Pins, this is the level for folks who may not have room for the bigger 2" pins, and want ALL FIVE mini-pins!
Thank you so much for reading, and supporting the campaign! I was out of town for the week and will be catching up on questions you guys may have in the next couple days.
I have placed and paid for the enamel pin order. This is the big one that will take the longest in production!
I have worked with this manufacturer before, and after placing the order and approving the designs from their team, it usually takes about a month before I start hearing back with some pictures of the pins. So hold tight!
I will be locking orders down on Tuesday, September 1st. You have until then to change around any pins in your order!
Next up I will be making the print order and talking with my sticker manufacturer. Both of these orders will take 2-3 weeks to get to me once I finalize payment, so I should get pictures of them very soon!
Thank you so much to the 80% of you that have completed your survey! You've given me enough information to send to my manufacturers and begin the ordering phase.
I haven't locked surveys for anyone yet, so there is still time to edit any choices!
I will be back once I've finalized the pin order and it officially goes into production!
A few of you guys should be getting your surveys today! If you are one of the folks chosen and happen to spot an error please let me know in the comments of this update!
There are about 30 backers that had payments that failed, so double check that yours went through!
For Pre-Launch Followers: I was actually able to add the option to pick your sticker design. I wasn't sure if I would be able to offer it when I created the bonus for the campaign. So you will be able to chose your sticker! I have added a 'Surprise Me' option if you still wanted a mystery sticker instead!
For USA backers: I was able to estimate shipping for each state, so for those of you on the east side of the country, your shipping is a little less than what I said it would be!
I will send out the rest of the surveys in the next day or so!
