Latest from the Creator
Katie Bacigalupi
7 months ago
Pins are Here!
So excited to share that pins have arrived! Here they are... The original 3: Renaissance, Baroque and Victorian. And the 4 add-ons: Magnolia, Dahlia, Hibiscus and Gladiolu...
3
0
1
Katie Bacigalupi
8 months ago
Pins are in Production!
I am so happy to say that pins are officially in production! After lots of back and fourth with multiple manufactures I have found a company who I feel will make my pins high qu...
2
0
1
Katie Bacigalupi
9 months ago
Manufacturing Update
Hello Backers,  Quick update on the manufacturing process. I had been working with a company for awhile, and was at the point where I was very pleased with everything and ready...
2
0
4
Katie Bacigalupi
10 months ago
Pin Progress Update
Hello Backers! Quick update on the pin process. I'm currently in talks with a manufacturer and hope to be in production within the next week or two. Very excited to finally see ...
0
0
0
Katie Bacigalupi
about 1 year ago
BackerKit Surveys Coming Soon + Some Flowers!
Hello everyone 👋🏼 The time has come to make your pin selections! A few months ago I did a poll on other flowers you'd like to see as pins. It was a near 4-way tie so I just d...
2
0
0
Katie Bacigalupi
about 1 year ago
Here’s what to expect next
Thank you for supporting History of Floral Fads which was 1 of 20 projects participating in Pintopia 2023. Thanks to your support 100% of the projects were fully funded! There a...
0
0
1
K

Was looking forward to these arriving, only to find not only the very flimsy package damaged, but both of the pins that were in it damaged. All of the prongs were bent to varying degrees, one so much so that I needed a pair of pliers to bend it enough to remove from the backing board. The Baroque pin is the least damaged on the front, with a tiny piece of the yellow at the tip appearing to have been shaved off. The Victorian pin has some blackish residue covering parts of the lower half; some of it did flake off but the rest will need to be scrapped away, hopefully without damaging the colouring underneath. And the Renaissance pin was missing entirely.

user avatar image for Katie Bacigalupi
1
Share

Share

Twitter

Facebook

Copy Link

PROJECT UPDATE
Katie Bacigalupi
CREATOR
7 months ago

Project Update: Pins are Here!

So excited to share that pins have arrived! Here they are...

The original 3: Renaissance, Baroque and Victorian.


And the 4 add-ons: Magnolia, Dahlia, Hibiscus and Gladiolus


Forgive the bad pictures (much harder to take pictures of pins than I thought!), but I am so happy with the quality of these pins. I will be shipping these little beauties out starting this week. Can't wait to share them with you all!

Katie
1
Share

Share

Twitter

Facebook

Copy Link

Edit
PROJECT UPDATE
Katie Bacigalupi
CREATOR
8 months ago

Project Update: Pins are in Production!

I am so happy to say that pins are officially in production! After lots of back and fourth with multiple manufactures I have found a company who I feel will make my pins high quality and the truest replica of my designs. The manufacturer says 4 week turn around time, and I plan on shipping as soon as I get them in hand. I will continue to keep you all updated. 

Katie
1
Share

Share

Twitter

Facebook

Copy Link

Edit
PROJECT UPDATE
Katie Bacigalupi
CREATOR
9 months ago

Project Update: Manufacturing Update

Hello Backers, 

Quick update on the manufacturing process. I had been working with a company for awhile, and was at the point where I was very pleased with everything and ready to start manufacturing. They recently informed me that the quote they gave was wrong and the actual cost would be double what was initially discussed. So, unfortunately I am back to shopping around with different companies in hopes of finding better costs, but still quality work. I will keep you all updated as the process moves forward. 

Katie
user avatar image for Katie Bacigalupi
4
Share

Share

Twitter

Facebook

Copy Link

Edit
PROJECT UPDATE
Katie Bacigalupi
CREATOR
10 months ago

Project Update: Pin Progress Update

Hello Backers! Quick update on the pin process. I'm currently in talks with a manufacturer and hope to be in production within the next week or two. Very excited to finally see these pins take shape. I will let you all know as soon as they are in my hand...and soon after, yours!

Thanks again for all the support, 

Katie 
0
Share

Share

Twitter

Facebook

Copy Link

Edit

Just checking in for an update. The original timeline has May for fulfillment.

user avatar image for Katie Bacigalupi
1
Share

Share

Twitter

Facebook

Copy Link

Katie Bacigalupi
CREATOR
12 months ago
48 votes
0
Share

Share

Twitter

Facebook

Copy Link

Edit
PROJECT UPDATE
Katie Bacigalupi
CREATOR
about 1 year ago

Project Update: BackerKit Surveys Coming Soon + Some Flowers!

Hello everyone 👋🏼 The time has come to make your pin selections! A few months ago I did a poll on other flowers you'd like to see as pins. It was a near 4-way tie so I just designed all 4 pins and will make them available as add-ons! All are 1.25" hard enamel with gold plating. Here's a sneak peek:


In the next few days you will receive an email with a special link to your BackerKit survey. It’s important to respond to your survey as quickly as you can since I need this information to fulfill your rewards. I'm setting the deadline to complete your survey to WEDNESDAY, APRIL 26.

When you receive the email with the survey, click the survey link to respond. Answer the questions about your reward preferences, provide shipping information, and purchase any add-on items that look good! You don’t have access to this survey link just yet, but it will be available soon via email 💌 After you respond to your survey, you can go back later and change your responses at any time before I close the surveys and get my final counts.

Everyone else who DID NOT support History of Floral Fads during the live campaign, it's not too late, you can order some floral pins via my History of Floral Fads pre-order store.

A big thank-you again to all my backers! I'm thrilled to be moving into the next phase of my first crowdfunding project!

Katie 🌸
0
Share

Share

Twitter

Facebook

Copy Link

Edit

Hello! I never received a survey to give my address or confirm which pins I'd like. I haven't heard anything about this project since my pledge was collected, whereas other pintopia projects I backed have already closed their surveys and started fulfillment. I have checked my spam folders and there is nothing. Help?

1
Share

Share

Twitter

Facebook

Copy Link

Hi! I recently had a second charge for this Backerkit go to my bank account after the initial one and I was wondering if I could get some help with it as Backerkit support didn't really help me. Thanks!

1
Share

Share

Twitter

Facebook

Copy Link

PROJECT UPDATE
Katie Bacigalupi
CREATOR
about 1 year ago

Project Update: Here’s what to expect next

Thank you for supporting History of Floral Fads which was 1 of 20 projects participating in Pintopia 2023. Thanks to your support 100% of the projects were fully funded!


There are a few next steps I wanted to share:

  1. Expect an email letting you know your payment has been charged. If there are any issues with your payment we will notify you with next steps.

  2. We will need to collect some additional info such as your pin selections and shipping information before we send rewards. In    the coming weeks we will send you a survey to collect that information.

  3. Since all Pintopia projects were 100% funded, you will be getting a FREE Pintopia 2023 pin from BackerKit. And if you backed 3+ pins you’ve earned some additional pins. Stay tuned for more information from BackerKit about how you will receive those pins.

Again, I sincerely thank for your support and stay tuned for more information soon.

Katie Bacigalupi

Includes Backer-Exclusive Content
1
Share

Share

Twitter

Facebook

Copy Link

Edit
PROJECT UPDATE
Katie Bacigalupi
CREATOR
about 1 year ago

Project Update: POLL : Which flower pin should I make next?



I'd like to start by saying another thank you to all who have backed! Very appreciative of all your support. Since I had so much fun creating my first set of 3 floral pins, I want to design more! I'd love to hear your thoughts on the next flower pin I should design. I'll check voting on Sunday evening (2/5) to see which two flowers earned the top spots.



I also wanted to share the free pin you will earn when you support 3+ Pintopia projects — it's called the "Pipe Weed Moth" pin and it's inspired by the moth featured in The Lord of the Rings films accompanied by a wreath of Gandalf's favorite herb.

Pipe Weed Moth a collaboration between my husband Jason Furie and I who is also running a Pintopia project of his own called Movie Moths. Check it out and support if you love moths, movies, or know anyone who does (of course you do!).

7
Share

Share

Twitter

Facebook

Copy Link

Edit
I don't have a lot of pins but the ones I have all seem to have the colors separated by the metal lines. I am curious to know if there is some effect that allows you to have multiple colors overlapping (like the different colors of shading on the petals)?
2
Share

Share

Twitter

Facebook

Copy Link

PROJECT UPDATE
Katie Bacigalupi
CREATOR
over 1 year ago

Project Update: Funded!



Funded in under 2 hours 🤯…!!! I am beyond excited, and incredibly grateful to all who have backed me so far. This is my first crowdfunding campaign, and I never expected such an outpouring of support. So truly and sincerely, thank you! I feel like my eight year old self in this picture, winning my first award ever, and for a drawing. 

And things are just beginning! Don’t forget, if you back multiple projects you get exclusive free collaboration pins. So continue supporting more of these fantastic designs! 
1
Share

Share

Twitter

Facebook

Copy Link

Edit