We've got a short but exciting update today! There hasn't been too much news since our last message: production has continued as expected, with no further surprises.
Last week, the Chain Mail and Meteorite D20s were completed and sent from the factory to our warehouse. They are on the boat right now, crossing the sea toward us. This should take 30-35 days, so we're expecting them to land in November. Once they are in the US and at our warehouse, we'll begin fulfilling the D20 pledges right away.
The Dinosaur Dice sets are also coming along well. They are expected to finish production this week and be sent to us shortly. Like the Chain Mail and Meteorite D20s, these will take 30-35 days to arrive, and we'll begin fulfilling these pledges once they are in our warehouse.
That's all for now—We'll be back again once the dice are in hand and ready to fulfill!
It's time for another production update! There's a lot to share today, so make sure you read the full update. Here a look at what's inside:
Dice Tray samples reviewed and approved
All production samples are complete
Meteorite and Chain Mail D20s on track
Production quality issue discovered in some dinosaur dice
Let's start with a quick note on that last point. In short, we've run into a manufacturing issue that is affecting some of the dice. We have already implemented a solution, but this has altered our shipping timeline. There are lots more details on the issue and how we're solving it below.
Dice Tray Samples Approved
In good news, we now have samples of the three (3) folding dice trays from the factory. They look great, and we've signed off on the run.
The dice trays were the final sample we were waiting on, so this completes all the accessories for the campaign. This is always an exciting moment in manufacturing, and one we're happy to share today.
Dice Manufacturing Update
On the dice side of production, Meteorite and Chain Mail D20s are on track and look great. However, as noted above, we've run into a quality issue with a small portion of Dinosaur Dice sets.
This problem is fragmentation, little flakes of fossils coming off during the embedment process. This is not unusual when embedding fossils, but some dice are exhibiting a higher-than-average fragmentation rate that exceeds our quality guidelines.
Triceratops D6s with a bit more fragmentation than we like to see...
Given the number of successful test sets we produced without issue, this was a little bit of a surprise. In any event, we've already compensated by quick shipping additional specimens to the factory to make sure we have enough material to complete the production run (plus a little bit more).
Naturally, we'll be taking more time to inspect each set as they are removed from their molds, as well as casting replacements. This means there will be an impact to the shipping timeline.
Right now, our factory estimates the dice will not be ready for shipment to our warehouse in the USA until late October. This is slower than expected—we were planning on them being in our warehouse and ready to fulfill at that point.
Rest assured, we're looking at all options to accelerate the delivery of components and additional production without sacrificing quality. We're also committed to keeping the cost the same.
To be 100% clear: Nothing in this production issue will come at any additional cost to you. We're going to absorb these costs directly.
Next Steps
If you look at the BackerKit timeline, we're supposed to charge cards this week for shipping and add-ons. We'll be hitting the pause button on that until the shipping timeline is solidified. We'll update again as soon as we have a firm ship window for items and then set a new charge date based on that.
If you've made it all the way down here, we'd like to thank you for your patience. Issues like these are never fun, but they are a fact of life in manufacturing. Every project is a totally new experience with its own quirks and hurdles. Crowdfunding gives you an inside look behind the scenes as creators grapple with a myriad of issues. All of us here appreciate your support, and we want to assure you we are all working hard to get these awesome dice out to all of you.
We have the first look at the factory's production samples ready to share today! Take a look at everything below:
Each of the Dinosaur Dice
The Campo del Cielo Meteorite D20
The Medieval Chain Mail D20
Each of the RWH pins
The Dinosaur Facts Playmat
These pictures come straight from the factory. We just couldn't wait to share this preview—it's too exciting to keep secret! Everything is looking fantastic. Once our photo team gets their hands on the items for the perfect shot, we'll share those as well.
Production Update
Outside of the samples, news has been uneventful but positive on the production side. Everything is running smoothly, and no hiccups have been reported. Last month, the factory received the final shipment of dinosaur inclusions. As we mentioned in previous updates, we chose to send the material in multiple shipments to avoid major losses of inclusion specimens due to shipping issues. Now that shipping is complete, nothing should slow the manufacturing of dice and add-ons. Everything is smooth sailing!
This is basically the best thing we could hear from the factory. We'll have a deeper update on production news once we are closer to completion!
Pledge Manager
There are still about 100 backers who have an open survey in the pledge manager—if that's you, then there is still time to complete the survey and share your shipping address. Please don't forget to do so soon!
Once we get closer to fulfilment we will begin locking down addresses. We'll be sure to put out a notice before this occurs!
That's all for now. We'll see you soon with another update!
We've got some exciting news to share: The Dinosaur Dice Set is getting an upgraded look!
A mockup of the new dice faces!
As we looked at how gamers were going to use the dice, we wanted an easy way to identify the specific fossil in each die. To accomplish that, we are investing in brand-new molds so that the highest number on each side will show the dinosaur captured inside. We are absorbing these fees ourselves, at no additional cost to the backers, so this is an awesome free upgrade for everyone getting a dinosaur dice set.
New Fulfillment Timeline
While production has begun, it's become clear that we'll need to make an adjustment to our fulfillment plan. Rather than try to rush this project and sacrifice quality, we'll need to push back the final shipping dates for backers.
The good news? We're only expecting a 2-month difference. According to our new production schedule, we'll have all products in our warehouse by late September, where they'll be ready to ship out immediately. We expect fulfillment to be complete in October, with plenty of time for the holidays for those of you sharing the dice as gifts.
Fulfillment delays are never something we choose lightly, but we believe it will result in a stronger final product and shipping experience. We will keep everyone informed as the production process continues!
Shipping + Add-on Charges
To that end, we are pushing back the charge dates for additional add-ons and shipping. Rather than doing this in July, we plan to do it in September, right before fulfillment begins. Like before, we'll make sure to send out an update in advance of the final charge date so you won't be surprised!
That's all for now. For our Pay Over Time backers, please make sure you complete your surveys as we'll be locking them later this month. We'll see you soon with another update!
Summer is beginning, and so is the mass production of dice! We're excited to dive into all the news around that, but first: Pay Over Time surveys are opening this month!
If you're a Pay Over Time backer, here's what to do: Once your pledge is completely paid for, we'll activate your survey. That should be early next week. You'll receive an email for you to fill out the survey as usual. Then, we'll lock the surveys closer to the end of the month! If there's any issue with this process, just let us know at [email protected], and we'll help you out. (This is our first time using Pay Over Time, but it looks like everything should go smoothly.)
Production Update
It's always a fun time shipping hundreds of dinosaur bones, meteorites, and chain mail pieces around the world. There are several possible complications in such a process, from a shipment being lost, to it being held up in customs, to it being damaged on its way to the factory. We've decided to play it safe and send our batches of dice inclusions a couple hundred at a time to avoid any critical shakeups to our production process.
Inclusions safely arrived at the factory!
Fortunately, we haven't run into specimen loss yet, and our partners at the factory have been awesome to work with, too! Everything has arrived safe and secure, just the way we like it. With this week's shipment, we've already sent around 600 of each inclusion, so 6,000 individual specimens. Most of those are fossil pieces—a whole lot of dinosaur dice!
With that amount, we're ready to begin mass production at the factory. We'll have another update on that process after the first batches are complete.
Packaging is almost finalized!
This week, we're putting the finishing touches on the print files for packaging! It's looking great and only needs a few last tweaks before they're good to go.
That's all for now. For our Pay Over Time backers, please keep an eye out for your surveys, and we'll see you soon with another update!
We use essential cookies and our own first-party analytics to run BackerKit. With your consent, we also use cookies to measure our marketing and share data with advertising partners to show you relevant ads. Accept to allow all cookies, or reject to turn off the optional ones.
Read our cookie policy.
