Orb Roc | All-In
Orb Roc Kit
Orb Roc features a unique (12) cradle arm and roller cam design. A battery-powered electric motor is connected to a variable speed controller which is turned on/off with the adjustment knob located on the back of the base. The motor drives a large gear that rotates (12) sets of eccentric roller cams. These cams contact the cradle arms to induce a rocking monition which cause the orbs to roll in various wave patterns.
LED Light Kit
This kit will include (2) LED units each containing 3 lights and the ability to independently change between 7 colors (Red, Green, Blue, Yellow, Purple, Cyan, White). Additional wiring will also be included, which will allow you to tie into the existing battery pack/rocker switch. Each LED can be placed wherever you desire by drilling a small hole in the base for wiring to pass through. The photo below is an example of (2) LEDS, one centered on the top of the base and the other below the base.
Leveling Kit
This kit will include (4) leveling feet, (4) longer base screws, and (1) surface level. The threaded feet will allow you to independently adjust each corner of the Orb Drop. With the assistance of the surface level you will be sure your base is perfectly level and the rubber pads provide an anti-slip grip to any smooth surface.
Power Adapter Kit
This kit includes (1) DC power cable (USB 2.0 x DC power jack) and (1) power jack connector. This kit replaces the AA battery holder and allows you to plug your Orb Drop directly into a wall outlet using a standard phone or electronics charger.
Orb Drop Stout
The Orb Drop Stout pays homage to the original Spinpal Stout but with a twist. The body is made using (4) laser cut wood discs and (8) steel ball weights which are the same orbs used in the Orb Roc. The body is held together with wood screws and utilizes plastic thumb nuts for the finger pads. At the core, this spinner features a high performance ceramic hybrid bearing with stainless steel races and ceramic balls. The Orb Drop Stout measures just over 2 inches in diameter and weighs 3 ounces.
All shipping fees will be collected after the campaign through surveys.
All shipping fees will be collected after the campaign through surveys.